¿Qué factores intervienen en las emisiones de PM10 de las torres de refrigeración?

We were recently asked about PM10 emissions for a cooling tower.  This relatively simple question is in fact quite complex. The short answer is that the PM10 emission rate depends on several factors. Nozzle type and pressure are a factor, and so are air velocity, drift eliminator design and the circulating water total dissolved solids (TDS). TDS is important because it determines the resulting particle size after evaporation changes the drift droplet into a salt particle. For low TDS water, most of the droplets will produce salt particles 10 microns or less, meaning all of the emissions will be PM10. For high TDS water, more particles will be greater than 10 microns, so less of the total emissions will be PM10.

To approximate PM10 emissions for your tower, the three variables you need to know are the circulating water TDS in ppm, the average air velocity at the DE plane, and the drift rate of the DE.