an image showing an extreme close up of the MASSdek 80 Grid from Brentwood Industries

MASSdek® 250 HTC Structured Packing

MASSdek 250 HTC is a high capacity structured packing that has a high specific area. It is high performing and is ideal for clean applications such as absorptions and desorptions where higher removals are requried and shorter column heights are desired.

Structured Packings At-A-Glance

+ = Fair +(+) = Fair to Good ++ = Good ++(+) = Better than good, not the best +++ = Best
ProductStructureSpecific Surface AreaHydraulic Capacity / Specific Pressure DropMass Transfer PerformanceResistance To Scaling And FoulingSpecific Pressure Drop / Number Of Transfer UnitsTypical Applications
MASSdek 80 Grid
Typical Applications
80 m²/m³
+++
+
+++
+++
For high fouling absorber and stripper applications where there is a high particulate loading in the gas stream or poor air quality.
MASSdek 125 HTC
Cross-Fluted
125 m²/m³
+++
+
+++
+++
A high capacity, cross-fluted structured packing meant for moderately fouling scrubber and stripper applications where fouling is not severe enough to require a grid packing.
MASSdek 150 HTC
Cross-Fluted
150 m²/m³
+++
++
++
+++
Excellent all-around structured packing for clean and moderately clean applications. A high capacity structured packing that is well-suited for absorption and stripper applications.
MASSdek 250 HTC
Cross-Fluted
240 m²/m³
++
++(+)
+
++
Designed to be a high capacity structured packing with a high specific area. It performs well in clean applications where high removal is required but a lower pressure drop is desired.
MASSdek 250 HTE
Cross-Fluted
240 m²/m³
+
+++
+
++
A high capacity structured packing made for clean applications where the highest removals are required.
Specifications table not found.
A quick and comprehensive overview of the MASSdek product line, along with recommended applications for each.

Metal Structured Packings At-A-Glance

+ = Fair +(+) = Fair to Good ++ = Good ++(+) = Better than good, not the best +++ = Best
ProductSpecific Surface AreaHydraulic Capacity / Specific Pressure DropMass Transfer PerformanceResistance To Scaling And FoulingSpecific Pressure Drop / Number Of Transfer UnitsTypical Applications
MASSdek 200S
170 m²/m³
+++
+(+)
+++
+++
Designed for vacuum or atmospheric distillations where low pressure drop is required and for absorbers in mildly fouling service.
MASSdek 250S
250 m²/m³
++
++
++
++
Best suited for absorbers and distillations where higher degree separations are required or lower pressure drops from shorter beds are required.
MASSdek 450S
350 m²/m³
+(+)
++(+)
+(+)
+(+)
Well-suited for higher degree separations where higher mass transfer efficiency is required.
MASSdek 750S
500 m²/m³
+
+++
+
+
Commonly used in distillations or absorbers in clean service where the highest mass transfer efficiency is required. Also suitable for smaller column diameters where a higher specific area packing provides superior performance.
Specifications table not found.
A quick and comprehensive overview of the MASSdek S Series, along with recommended applications for each.
Abstract image featuring a minimalist design of white and light gray geometric shapes. The background has a subtle gradient, creating a clean and modern aesthetic.
X