an image showing an extreme close up of the MASSdek 80 Grid from Brentwood Industries

MASSdek® S Series Structured Packing

The MASSdek S Series combines high performance structured packing characteristics with metal, well-suited for a wide variety of applications including petrochemical and refineries. These characteristics allow for a structured packing with low pressure drop, excellent separating efficiency, and high throughput capacity. Its design creates a high compression strength and a gas and liquid distribution that is maintained effectively though the whole module.

Structured Packings At-A-Glance

+ = Fair +(+) = Fair to Good ++ = Good ++(+) = Better than good, not the best +++ = Best
ProductStructureSpecific Surface AreaHydraulic Capacity / Specific Pressure DropMass Transfer PerformanceResistance To Scaling And FoulingSpecific Pressure Drop / Number Of Transfer UnitsTypical Applications
MASSdek 80 Grid
Typical Applications
80 m²/m³
+++
+
+++
+++
For high fouling absorber and stripper applications where there is a high particulate loading in the gas stream or poor air quality.
MASSdek 125 HTC
Cross-Fluted
125 m²/m³
+++
+
+++
+++
A high capacity, cross-fluted structured packing meant for moderately fouling scrubber and stripper applications where fouling is not severe enough to require a grid packing.
MASSdek 150 HTC
Cross-Fluted
150 m²/m³
+++
++
++
+++
Excellent all-around structured packing for clean and moderately clean applications. A high capacity structured packing that is well-suited for absorption and stripper applications.
MASSdek 250 HTC
Cross-Fluted
240 m²/m³
++
++(+)
+
++
Designed to be a high capacity structured packing with a high specific area. It performs well in clean applications where high removal is required but a lower pressure drop is desired.
MASSdek 250 HTE
Cross-Fluted
240 m²/m³
+
+++
+
++
A high capacity structured packing made for clean applications where the highest removals are required.
Specifications table not found.
A quick and comprehensive overview of the MASSdek product line, along with recommended applications for each.

Metal Structured Packings At-A-Glance

+ = Fair +(+) = Fair to Good ++ = Good ++(+) = Better than good, not the best +++ = Best
ProductSpecific Surface AreaHydraulic Capacity / Specific Pressure DropMass Transfer PerformanceResistance To Scaling And FoulingSpecific Pressure Drop / Number Of Transfer UnitsTypical Applications
MASSdek 200S
170 m²/m³
+++
+(+)
+++
+++
Designed for vacuum or atmospheric distillations where low pressure drop is required and for absorbers in mildly fouling service.
MASSdek 250S
250 m²/m³
++
++
++
++
Best suited for absorbers and distillations where higher degree separations are required or lower pressure drops from shorter beds are required.
MASSdek 450S
350 m²/m³
+(+)
++(+)
+(+)
+(+)
Well-suited for higher degree separations where higher mass transfer efficiency is required.
MASSdek 750S
500 m²/m³
+
+++
+
+
Commonly used in distillations or absorbers in clean service where the highest mass transfer efficiency is required. Also suitable for smaller column diameters where a higher specific area packing provides superior performance.
Specifications table not found.
A quick and comprehensive overview of the MASSdek S Series, along with recommended applications for each.
Abstract image featuring a minimalist design of white and light gray geometric shapes. The background has a subtle gradient, creating a clean and modern aesthetic.
X